Making a Webcomic - Part 2 by J. Logan Carey

Thanks for coming back for the second part in my as-yet-to-be numbered series in making a webcomic. Back in the first installment, I talked about I decided to redraw the first few panels on paper and see how it turned out. Well below you can see the fruits of that effort...


So obviously this is rough stuff, but honestly, I'm VERY pleased with how it is coming together. This is my first completed comic page of pencils. <does happy dance>

After finishing the page, I took the picture you see above and imported it into Procreate to start the inking process. I outlined the panels which aren't perfect but I'm happy with the straight lines.

Procreate tip: As you draw a line, if you stop and still hold the stylus to the screen the line will "snap" straight from the point you started the line to the point you stopped.


I couldn't help myself and decided to start a new layer and try my hand at some coloring the first couple of panels. Again, I am VERY happy with the tools available in Procreate as it is very approachable even for an amateur like myself. Now to just keep working on the ink for page one. I think I might even get a little crazy and color the rest of it. I still have many more pages to do, but it will be a big symbolic victory to finish a page to completion. I have also decided to try doing as much of the process on my iPad Pro as possible. As such, I'll be looking into options for lettering on the iPad, so we'll see what kind of results I can get with different apps.

Next Step: Coloring and Adding Text Bubbles

Adventures in 3D Printing by J. Logan Carey

This is more DIY project related than art related specifically, but I thought some people might enjoy this one.

So I like to occasionally browse the internet for vintage things that have to do with local stuff. Living in Chattanooga, Tennessee, there isn't anything quite as iconic as the See Rock City signs you can still see painted on old barns for miles in every direction and I came across this awesome sign that was formally a functional date keeper. Presumably, and let me know if anyone has more details about this one, it would have been hanging somewhere around Chattanooga in what I would guess was the 60s or 70s, very cool.


When I got it, it was pretty dirty and obviously the belts on the inside weren't being held in place anymore. I noticed it actually was two pieces, the front metal piece with the graphics could just slide up and off. I'm guessing whoever made these made a bunch of different versions for different businesses. 

Here's what was on the inside:


This was really good actually. The date belts were all still intact and with a light wash of warm soapy water they cleaned up very well. The yellowish tint comes from the sun-stained plastic covering the date windows in the front. It became clear that out of the four original spindles (my word, not sure if it's right) used to turn the day, date, and month, only one was complete and unbroken and two were completely missing. There are four holes in the side for the spindles to project out and then anyone could change the date just by spinning the appropriate spindle.

Here's the one good and one bad spindle:


Now this wasn't the biggest disappointment in the world. I figured I could probably tape the belts to the windows in the sign so at least it would appear functional. That's when my ever clever better half, Jacque Nodell, suggested we go to the Chattanooga Public Library. Not to research where to find replacement parts, who knows where you would find replacement date spinners for an advertisement sign from fifty-something years ago, but to check out the library's excellent fourth floor resources which include of all things, a set of 3D printers available to the public.

Now, I pretty much knew as much as anyone off the street about 3D printing. I knew it was cool, and looked complicated, that's about it. We decided to be totally honest with the fourth floor staff and explain how total beginners we were with this project. The staff was super helpful and guided us to a computer where in a few moments I had created a free account on TinkerCAD. Now, while I have a technology background as that's what I do for my day job, I'll say the interface is extremely user-friendly. If you have any interest whatsoever in getting into 3D design, it's worth making a free account and playing with the tools.

After about half an hour spent going through the online tutorial, I decided to give it a try and see if I could mock-up a prototype for the replacement parts I needed. Below is the result:


Not too bad if I don't say so myself. The library staff was duly impressed I was able to learn the software and complete a design in about an hour. Proud nerd is proud. 

After a few test pieces and learning some tricks with the FlashForge 3D printer the library uses like spraying a layer of hairspray on the printing deck so the first layer of plastic from the extruder sticks down enough to not go flying as it moves back and forth, we were able to get pieces that very closely resembled the originals.


Looks aside, the real test was installing them and seeing if they would hold the date belts in place and turn them as well.

Check out the result:


Everything held together fine and turned like a dream! The amount of plastic we used from the library cost us about $1.

After cleaning up the front face of the sign with some more warm soapy water and sliding it back into place, here's the end result we now have hanging on our wall:


We chose to leave it on May 20th as that's our anniversary which fit nicely with the whole "Make a Date" graphics on the front. 

I am super happy with how this project turned out and will love looking at this piece on our wall for years to come. The whole thing has made me start looking around our place for other things we could 3D print to fix or organize better. The library of already created designs in TinkerCAD is really worth a look, people have already uploaded thousands of ideas for things from Apple Pencil holders to gaming dice. 

Thanks for reading!

Making a Webcomic - Part 1 by J. Logan Carey

Welcome to the first post detailing the nitty gritty of making a webcomic, or at least, my bumbling my way through making my first webcomic, from pencils all the way to pixels.

Since this is all going to be a learning process, I didn't want to get too bogged down worrying about using only the highest quality supplies and industry standard widths and margins used by all the biggest publishers. I'm just a person on the interwebs trying to make a funny book. So I settled on using a Strathmore Drawing pad, Medium Surface, 9 x 12, 80 lb. This paper is high quality enough that I think it looks good and lends well to finished art while being pretty cheap to get your hands on. While I did purchase a pad of SUPER EXTREMO FANCY 11 x 17 paper made expressly for the purpose of drawing comics on, I'm not using it. It looks awesome, but it's way too overwhelming to think about drawing something that size at this point in my life. 

Now that I've got my drawing medium for my pencils, I've got to decide what dimensions to use. If you're trying to answer this question for your own comic, buckle your seatbelt before you hit SEARCH because there's about 4,000 different answers. While you may be tempted to look at what the big kids are using in their studios...who cares? Just find a size you're comfortable with and can lend well to scanning. I am drawing my comic at 8 inches wide by 10 1/2 inches tall. It's probably a little wider than modern comics, but if you ask me, modern comics are too damned skinny anyway. Plus, this comic is going online, and in the magic of the internet <insert rainbow>, you can make your comic whatever the hell dimension you want. As long as it's no wider than a standard screen ratio or as long as you use a responsive site which will auto-size your images.

I've also decided to redraw the first panel of Gemini on my page seen below:


Gemini will take place in the desert so that'll require a lot of desert type landscape sketch practice.


While I have Clip Studio Paint, I think I'm going to give it a shot inking and coloring on my iPad. I've been super impressed with the art apps available for it like Procreate which just seems to keep getting better.

Hopefully I'll have the all the panels on the first page filled out for my next post.

Next Step: Start Drawing in Procreate